10-06-2009 05:31 PM - edited 03-15-2019 07:56 PM
I have a strange problem at a site where inbound dialing into the CME 4.1 works fine. 3 POTS lines into an FXO card. Outbound dialing either gives fast busy or "number has been disconnected". If i do a debug on dial peer it looks like everything is working. Tested from the telco demarc and works fine without CME in the mix. Anyone run into something like this before? CME 4.1, IOS 12.4.15T. Thanks in advance
Solved! Go to Solution.
10-06-2009 05:43 PM
Make sure your dial-peers are correct and you're sending the necessary digits, if they're correct do a debug voip ccapi inout to find who and why the call is dropped
HTH
java
if this helps, please rate
10-06-2009 05:43 PM
Make sure your dial-peers are correct and you're sending the necessary digits, if they're correct do a debug voip ccapi inout to find who and why the call is dropped
HTH
java
if this helps, please rate
10-07-2009 04:00 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide