Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME 4.1 - Transfer calls to outside numbers

When receiving a call on an IP phone it is not possible to tranfer it to an outside number, only to inside numbers. What should I do to fix this?

  • IP Telephony
3 REPLIES
Hall of Fame Super Gold

Re: CME 4.1 - Transfer calls to outside numbers

As I was telling you in the other thread, check what you have as "transfer-pattern" under "telephony-service". You can have multiple patterns, if you want transfer to external, must include the digit you dial for external access.

Hope this helps, please rate post if it does!

New Member

Re: CME 4.1 - Transfer calls to outside numbers

Thanks for your help. It was it.

Hall of Fame Super Gold

Re: CME 4.1 - Transfer calls to outside numbers

Glad to know it worked. Would you consider rating useful posts using the scrollbox below?

Good luck!

220
Views
0
Helpful
3
Replies