Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 7.0(1) and consult transfer problem

Hi to everyone!

I have a CME 7.0(1) on a 2811 (IOS: c2800nm-spservicesk9-mz.124-22.T1.bin).

My problem is that, sometimes, when an incoming call from the PSTN (via BRI) is answered by the attendant (using a 7962 + 2 7915) and transferred with consultation (to a 7931), the call isn't actually transferred, but it comes back to the attendant phone.

If it can be useful, every DN is configured this way:

ephone-dn X dual-line

number YY

allow watch

call-forward busy ZZ

huntstop channel


where ZZ is the attendant DN.

Phone loads are:

load 7915-12 B015-1-0-2

load 7915-24 B015-1-0-2

load 7931 SCCP31.8-3-3S

load 7962 SCCP42.8-3-5S

Can you help me?

Thanks in advance for your help!

Best regards.

CreatePlease to create content