Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME 7.0/4.3 post upgrade ATA problems

We just upgraded a 3845 to 12.4(20)T1 and now have a problem with an ATA.

The ATA used both lines with different numbers (Dn), each line connected to a seperate overhead paging system. After the upgrade, only one DN seems to be allowed.

Pre upgrade:

ephone-72 Mac:0019.E851.2790 TCP socket:[83] activeLine:0 REGISTERED in SCCP ver 1 and Server in ver 1

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:6

IP:192.168.174.67 2174 ATA Phone keepalive 677952 max_line 2 dual-line

button 1: dn 72 number 8465 CH1 IDLE CH2 IDLE

button 2: dn 79 number 2040 CH1 IDLE CH2 IDLE

paging-dn 150

Post upgrade:

ephone-72[71] Mac:0019.E851.2790 TCP socket:[14] activeLine:0 REGISTERED in SCCP ver 1/1

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:6

IP:192.168.174.83 14672 ATA Phone keepalive 15 max_line 1

button 1: dn 72 number 8465 CH1 IDLE CH2 IDLE

paging-dn 150

Preferred Codec: g711ulaw

I notice that there is a item in there "max_line 1" what determiens that?

Any ideas how to solve?

Thanks.

146
Views
0
Helpful
0
Replies
CreatePlease to create content