Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME 7.1 User GUI administration

CME 7.1 (12.4.22YB3), with extension mobility enabled.

An octo-line ephone-dn shared amongst 4 users, the state of CFNA, CFA or CFB from the user's GUI interface can't be changed.


voice user-profile 22

user 8422 password 12345

number 1001,1000 type normal


ephone-dn 2 octo-line

number 1000

label IT Operations 1000

name IT IT

corlist incoming Restricted


ephone-dn 22 dual-line

number 1001

pickup-group 200

label John Smith

name John Smith

call-forward busy 1999

call-forward noan 1999 timeout 15

corlist incoming Unrestricted


The user is able to change the CFA from their phone.

Hall of Fame Super Gold

Re: CME 7.1 User GUI administration

Contact TAC, ask to reproduce, file a bug as necessary or provide a solution.

Re: CME 7.1 User GUI administration

I know that the GUI has not been updated for octo-lines and some of the CME 7.0/7.1 features. This functionality was being ported over to CCP (cisco configuration professional).

Your mileage may vary with trying to have new things added to the CME GUI.

It's worth a TAC case, but thought I would give you fair warning.


Hall of Fame Super Gold

Re: CME 7.1 User GUI administration

Thing is, as much the CME GUI is deprecable, it gives the only known way for an user to CFA a phone without accessing it physically.

I do not see CCP as a valid replacement for that (admittedly I never used it).

Re: CME 7.1 User GUI administration

This is probably true.

(I've admittedly used the GUI and CCP about once each).