Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 7 SIP 7960 Phones wont register

I am trying to register a 7960 as a SIP Phone. I have read many articles but still no luck. I have attached my config.

Its state that you should use the 7960 firmware P0S3-08-6-00.

I have appled the following advice but still no luck.

http://bitswap.wordpress.com/2009/03/25/cme-with-sip-and-skinny-phones/

Thanks for support guys

7 REPLIES
Hall of Fame Super Gold

Re: CME 7 SIP 7960 Phones wont register

Why do you want to use SIP instead of SCCP ?

You just loose features and gain bugs in doing so.

New Member

Re: CME 7 SIP 7960 Phones wont register

I need to practice for the CCIE Voice LAB Please do you have any advice

Re: CME 7 SIP 7960 Phones wont register

From the logs you posted it looks like the phone is registering.

What does 'debug ccsip message' look like?

What exactly isn't working here?

-nick

New Member

Re: CME 7 SIP 7960 Phones wont register

Hi Nick

The url I gave is not my config its the config I copied ,my config is the attached document I will attach it again here. I tried the debug you mentioned it gave no output.

Please can you check if my files in my flash are correct and attached config.

Also do you know the correct 7960G firmware loads I must have if its not correct.

Concerning my carrent config the 7960G

is cycling through the following 3 phases.

1.verifying Load

2.Downgrading Application

3.Copy to bank1

Thanks for your support Nick.

Re: CME 7 SIP 7960 Phones wont register

Try removing the load command, and doing 'debug tftp events' and 'debug ccsip messages'.

Make sure you use 'term mon' to look at the debugs.

New Member

Re: CME 7 SIP 7960 Phones wont register

Nothing comming from the debug ccsip messages command from the debug tftp events I get the following output

*Aug 28 16:56:08.986: TFTP: Looking for CTLSEP001DA266E38C.tlv

*Aug 28 16:56:09.018: TFTP: Looking for SEP001DA266E38C.cnf.xml

*Aug 28 16:56:09.038: TFTP: Looking for SIP001DA266E38C.cnf

*Aug 28 16:56:09.038: TFTP: Opened flash:/SIP001DA266E38C.cnf, fd 7, size 1317 for process 330

*Aug 28 16:56:09.058: TFTP: Finished flash:/SIP001DA266E38C.cnf, time 00:00:00 for process 330

*Aug 28 16:56:09.094: TFTP: Looking for P003-08-8-00.loads

*Aug 28 16:56:09.738: TFTP: Looking for P003-08-8-00.sbn

*Aug 28 16:56:09.738: TFTP: Opened flash:P003-08-8-00.sbn, fd 7, size 130952 for process 330

*Aug 28 16:56:11.334: TFTP: Finished flash:P003-08-8-00.sbn, time 00:00:01 for process 330

New Member

Re: CME 7 SIP 7960 Phones wont register

The issue has been resolved I used the exact same firmware Loads thats used in call manager 7.

P003-08-8-00.sbn

P0S3-08-8-00.loads

P0S3-08-8-00.sb2

P003-08-8-00.bin

OS79XX.TXT

1031
Views
0
Helpful
7
Replies