Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 8.0 module 7915 backlight off

Hi all,

I have a CME 8.0 installation with a 7962 and a 7915 connected to it.

Everything works fine but the 7915 does not light, when it boots it lights the backlight but turns it off again and shows the configured buttons but very dark.

Is there anything I can change?

Lastest firmware installed (9.0.2 on 7962 and 1.0.4 on 7915)

Many thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CME 8.0 module 7915 backlight off

You can control the contrast of the 7915 module from the IP phone.

1. Settings

2. User Preferences

3. Contrast

4. Choose the option for your 7915, which should be option 2 "Expansion Module 1 (7915)"

Once you adjust and save, it should stick. No configs needed on CME.

HTH.

Regards,

Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

2 REPLIES

Re: CME 8.0 module 7915 backlight off

You can control the contrast of the 7915 module from the IP phone.

1. Settings

2. User Preferences

3. Contrast

4. Choose the option for your 7915, which should be option 2 "Expansion Module 1 (7915)"

Once you adjust and save, it should stick. No configs needed on CME.

HTH.

Regards,

Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Re: CME 8.0 module 7915 backlight off

I'm feeling stupid... I looked for 2 days and no answer anywhere...

Many thanks

1745
Views
0
Helpful
2
Replies
CreatePlease to create content