CME 8.6 integration with Polycom IP 7000 Sound station

[pratapag5]

Hi Team,

I need to integrate an IP 7000 device with CME version 8.6. I understand that IP 7000 talks only SIP. So, first of all I would like to know if this integration is posible. If it is possible, I would like to know what the required IP 7000 firmware version is for integration with CME. Also, could you please point me to a document with the integration procedure?

Thanks in advance.

Regards,

Suchitra 

[paolo bevilacqua]

You can search for "CME third-party SIP phone", a subject that has been discussed many many, times already.

[pratapag5]

Thanks for the reply, Paolo. More than the configuration, I want to know the SIP firmware image for IP 7000 on CME. Could you please let me know this information? I did not get this information from any previous discussion (I have checked most of these).

Regards,

Suchitra

[ronpatel]

Hi,

Polycom IP 7000 is not Cisco product, so Cisco CME will not give any firmware for it.

If you are talking about 7937G phone which are Cisco Conference phones, these phones are SCCP phones.

Regards

Ronak Patel

Please rate helpful posts.

[pratapag5]

Hi, I am trying to register a Polycom Ip 7000 with CME, but I am getting the following errors:

Mar 31 11:45:01: voice_reg_get_reg_expires_timer: no voice register pool found

Mar 31 11:45:01: VOICE_REG_POOL: Register request for (74500) from (149.77.184.43)

Mar 31 11:45:01: auth absent

Mar 31 11:45:01: VOICE_REG_POOL: key(1026666623088358) added to nonce table

Mar 31 11:45:01: VOICE_REG_POOL: Contact doesn't match any pools

Mar 31 11:45:01: voice_reg_get_reg_expires_timer: no voice register pool found

Mar 31 11:45:01: VOICE_REG_POOL: Register request for (74500) from (149.77.184.43)

Mar 31 11:45:02: auth present

Mar 31 11:45:02: VOICE_REG_POOL: Contact doesn't match any pools

Mar 31 11:45:02: voice_reg_get_reg_expires_timer: no voice register pool found

Mar 31 11:45:02: VOICE_REG_POOL: Register request for (74500) from (149.77.184.43)

Mar 31 11:45:03: auth absent

Mar 31 11:45:03: VOICE_REG_POOL: key(B96F164F230883E7) added to nonce table

Mar 31 11:45:03: VOICE_REG_POOL: Contact doesn't match any pools

Mar 31 11:45:03: voice_reg_get_reg_expires_timer: no voice register pool found

Mar 31 11:45:03: VOICE_REG_POOL: Register request for (74500) from (149.77.184.43)

Mar 31 11:45:03: auth present

Mar 31 11:45:03: VOICE_REG_POOL: Contact doesn't match any pools

Mar 31 11:45:45: voice_reg_get_reg_expires_timer: no voice register pool found

Mar 31 11:45:45: VOICE_REG_POOL: Register request for (74500) from (149.77.184.43)

Mar 31 11:45:45: auth absent

Mar 31 11:45:45: VOICE_REG_POOL: key(D2AA312B23089480) added to nonce table

Mar 31 11:45:45: VOICE_REG_POOL: Contact doesn't match any pools

Mar 31 11:45:45: voice_reg_get_reg_expires_timer: no voice register pool found

Mar 31 11:45:45: VOICE_REG_POOL: Register request for (74500) from (149.77.184.43)

Mar 31 11:45:46: auth present

Mar 31 11:45:46: VOICE_REG_POOL: Contact doesn't match any pools

Also, "

sh voice register pool attempted-registrations" clearly tells that this is some authorization issue.

cme1.mjv.shaw.net#sh voice register pool attempted-registrations

Phones that have attempted registrations and have failed:

MAC address:

IP address : 149.77.184.43

Attempts   : 218

Time of first attempt : 11:04:34.217 UTC Sat Mar 31 2012

Time of latest attempt: 11:55:27.169 UTC Sat Mar 31 2012

Reason for failure    :

        Unauthorized registration request

Could you please help me fix this issue?

Here is the related configuration from my device:

voice service voip

allow-connections sip to sip

sip

  registrar server expires max 1200 min 300

voice register global

mode cme

source-address 10.240.215.16 port 5060

max-dn 5

max-pool 5

tftp-path flash:

create profile sync 2251060396647059

voice register dn  1

number 55555

!

voice register dn  2

number 74500

!

voice register pool  1

id mac 0004.F2E8.BACC

number 1 dn 2

dtmf-relay sip-notify

username PlcmSplp password PlcmSplp

codec g711ulaw

Regards,

Suchitra

[pratapag5]

As you can see, I have not configured any "load" configuration. Please suggest here.

Regards,

Suchitra