Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME 8.X Remote to Phone IP

How would you or can you enable web access enable a phone on a Call Manager Express?  So on CUCM  I would select the phone and on the device settings pick Web Access Enabled.  This allows me to ip to the phone and retrieve things such as QOS.  But Not sure how this works for the Call Manager express.  Does anyone have any idea's?               

1 ACCEPTED SOLUTION

Accepted Solutions

CME 8.X Remote to Phone IP

This has been covered already in this post:

https://supportforums.cisco.com/thread/2010393

Basically enter the following:

Telephony-service

Service phone webAccess 1

Create cnf-files

Note: you need to reset the phones for this to take effect.

Kind Regards,

Stephen Welsh

================================================================

Enroll for Unified FX’s FREE Educational seminars on The Essentials of Endpoint Security & Compliance

• Session 1: The Impact of Security by Default (5th Sept)
• Session 2: Understanding and Managing ITL & CTL Files (12th Sept)
• Session 3: Leading Practices for Endpoint Security & Compliance (19th Sept)
Spaces are limited and we anticipate high demand, so please register early:

http://events.unifiedfx.com

================================================================

1 REPLY

CME 8.X Remote to Phone IP

This has been covered already in this post:

https://supportforums.cisco.com/thread/2010393

Basically enter the following:

Telephony-service

Service phone webAccess 1

Create cnf-files

Note: you need to reset the phones for this to take effect.

Kind Regards,

Stephen Welsh

================================================================

Enroll for Unified FX’s FREE Educational seminars on The Essentials of Endpoint Security & Compliance

• Session 1: The Impact of Security by Default (5th Sept)
• Session 2: Understanding and Managing ITL & CTL Files (12th Sept)
• Session 3: Leading Practices for Endpoint Security & Compliance (19th Sept)
Spaces are limited and we anticipate high demand, so please register early:

http://events.unifiedfx.com

================================================================

143
Views
0
Helpful
1
Replies