Cisco Unified CME 8.5 allows you to control the display of soft keys on the Cisco Unified SIP IP Phones 8961, 9951, and 9971 using the Feature Policy template. The Feature Policy template allows you to enable and disable a list of feature soft keys on Cisco Unified SIP IP Phones 8961, 9951, and 9971. Table 79 lists the controllable feature soft keys with specific feature IDs and their default state on Cisco Unified SIP IP Phones 8961, 9951, and 9971.
Cisco Unified CME uses the existing softkey command under voice register template configuration mode to control the controllable feature soft keys on phones. Cisco Unified CME generates a featurePolicy.xml file for each voice register template configured. The list of controllable soft key configurations are specified in the featurePolicy.xml file. Phones need to reboot or reset to download the Feature Policy template file. For Cisco IP phones that do not have a Feature Policy template assigned to them, you can use the default Feature Policy template file (featurePolicyDefault.xml file).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...