09-12-2014 02:59 PM - edited 03-17-2019 12:08 AM
Hello,
I configured a shared line between a sccp VG224 port and a sip 3905 phone but it doesn't work.
For sccp I used
ephone-dn 15 dual-line
shared-line sip
number 631 no-reg primary
and for 3905 i used
voice register dn 15
shared-line
number 631
both phones are registered but if i make an incoming call to number 631 sometimes i get sccp phone ringing but not sip , other times sip phone ringing but not sccp, rarely both ringing correctly.
can anybody help me?
tks
johnny
09-12-2014 04:33 PM
Seems to be config issue,check the config guide for mixed shared for SIP and SCCP section.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#pgfId-1081127
also check this thread
https://supportforums.cisco.com/discussion/11631966/cme-91-shared-line-between-sip-and-sccp-phone-problem
Br,
Nadeem
09-15-2014 02:48 AM
Here my config
but doesn't work :(
ephone-dn 3 dual-line
number 630 no-reg primary
label Capoturno
description Capoturno
shared-line sip
ephone 3
mac-address F489.EFE0.F400
max-calls-per-button 2
type anl
button 1:3
voice register dn 3
number 630
name Capoturno
shared-line
label Capoturno
voice register pool 3
busy-trigger-per-button 1
id mac 381C.1ABA.42E0
type 3905
number 1 dn 3
dtmf-relay rtp-nte
username 630 password 630
codec g711ulaw
#sh version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M6a, RELEASE SOFTWARE (fc1)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: