Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME 9.1 shared line between sccp VG224 (stcapp) and sip 3905

Hello,

I configured a shared line between a sccp VG224 port and a sip 3905 phone but it doesn't work.

 

For sccp I used

ephone-dn 15 dual-line

shared-line sip

number 631 no-reg primary

 

and for 3905 i used

 

 

voice register dn 15

shared-line  

number 631

 

both phones are registered but if i make an incoming call to number 631 sometimes i get sccp phone ringing but not sip , other times sip phone ringing but not sccp, rarely both ringing correctly.

 

can anybody help me?

 

tks

johnny

 

2 REPLIES
Cisco Employee

 Seems to be config issue

 

Seems to be config issue,check the config guide for mixed shared for SIP and SCCP section.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#pgfId-1081127

 

also check this thread

https://supportforums.cisco.com/discussion/11631966/cme-91-shared-line-between-sip-and-sccp-phone-problem

 

 

Br,

Nadeem

 

Br, Nadeem Please rate all useful post.
Community Member

 Here my configbut doesn't

 

Here my config

but doesn't work :(

 

ephone-dn  3  dual-line
 number 630 no-reg primary
 label Capoturno
 description Capoturno
 shared-line sip

ephone  3
 mac-address F489.EFE0.F400
 max-calls-per-button 2
 type anl
 button  1:3

voice register dn  3
 number 630
 name Capoturno
 shared-line
 label Capoturno

voice register pool  3
 busy-trigger-per-button 1
 id mac 381C.1ABA.42E0
 type 3905
 number 1 dn 3
 dtmf-relay rtp-nte
 username 630 password 630
 codec g711ulaw

 

 

 

#sh version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M6a, RELEASE SOFTWARE (fc1)

 

 

 

 

 

 

 

217
Views
10
Helpful
2
Replies
CreatePlease to create content