Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME and non Cisco IP phones.

Hi all,

can we use our the non Cisco IP phones (MGCP or SIP capable) with CME?

BR

jl

5 REPLIES
Silver

Re: CME and non Cisco IP phones.

Yes, you can use non cisco IP phones with SIP.

Regards

Community Member

Re: CME and non Cisco IP phones.

Hi all,

first thanks for help. What version of CCME should we use to correctly configure our SIP IP phones. Is over there any documentation how to use CCME and how to configure it with relation to the SIP non Cisco phones?

BR

jl

Community Member

Re: CME and non Cisco IP phones.

You can find information on how to configure

CME to support SIP here:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration

_guide_book09186a008052da6b.html

However,

"CME 4.0 'may' register 3rd party SIP phones, however 3rd party SIP phones are not currently Cisco supported.

While Cisco does comply with RFC3261 standard-based support for Session Initiation

Protocol (SIP),unfortunately at present we don't support 3rd party SIP phones."

here is a link for reference stating support.

http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_whi

te_paper0900aecd80422c70.shtml

Community Member

Re: CME and non Cisco IP phones.

I have got one additional question.

Where we should start related to version of CCME? I see I can download from Cisco web release from cme-3.0 to 4.2. What is a stable version?

BR

jl

Hall of Fame Super Gold

Re: CME and non Cisco IP phones.

CME 4.1, that is IOS 12.4(11)XJ4 is pretty stable.

Most SIP phones are known to work.

Hope this helps, please rate post if it does!

216
Views
13
Helpful
5
Replies
CreatePlease to create content