I have a centralized CM topology with 3 distributed Unity associated with our 3 corresponding hub sites (ie West Coast-USA, East Coast-USA, UK). CME-as-SRST is configured and working properly at the 3 hubs.
On one of the hubs (East), there are 3 small branches (ie Illnois, Minn, and Bermuda) home to the East Unity server. These 3 are currently setup as regular SRST (NOT CME-as-SRST) if CM fails.
Is there a way to setup VM access for these smaller remote sites if I migrate from SRST to CME-as-SRST mode? I guess I can do some type of SIP but would prefer sccp in the CME fashion. I am looking at the doc below:
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.