Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME - BLF Problem

Hi guys,

I have a problem with a BLF configuration on a CME 8.6.

The Problem is that the icon for BLF is a keypad and NOT a phone icon.

Also under "#sh presence subscription summary" the 611 and 619 are not shown.

I have also a 7961 with a 7914 Module which works without issues.

Here is the config:

presence

presence call-list

max-subscription 144

watcher all

allow subscribe

!

sip-ua

presence enable

!

ephone-dn 63  dual-line

number 611

pickup-group 1007

mobility

snr 001234567890# delay 10 timeout 60 cfwd-noan 605

allow watch

call-forward noan 805 timeout 10

!

ephone-dn  64  dual-line

number 619

pickup-group 1007

mobility

snr 009876543210# delay 10 timeout 60 cfwd-noan 605

allow watch

call-forward noan 805 timeout 10

no forward local-calls

!

ephone  16

blf-speed-dial 1 611 label "611"

type 7961

button  1:16 2s17 3:64 4o44,53

!

ephone  17

device-security-mode none

blf-speed-dial 1 619 label "619"

type 7961

button  1:17 2s16 3:63 4o44,53

...any ideas?

Thanks a lot.

Cristian

Everyone's tags (3)
5 REPLIES
Hall of Fame Super Gold

CME - BLF Problem

can you try

ephone  17

no button  3:63

restart

New Member

CME - BLF Problem

Hi Paolo,

ok. done.

and now?

Thanks.

Hall of Fame Super Gold

CME - BLF Problem

And now check if the phone show over keypad for blf-speed-dial.

New Member

CME - BLF Problem

same problem.

the keypad is still displayed.

I have added and re-added the button more than one time but still the same...

Thanks.

New Member

CME - BLF Problem

Problem solved: cable unplugged/plugged back in.

757
Views
0
Helpful
5
Replies
CreatePlease login to create content