Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME Call History with overlaid phone number config

I have a small office with three inbound lines on an FXO card that are overlaid on the first button of each phone in the office. If a calls goes RNOA, on the phone should i be able to see the missed call history?

ephone-dn 1

number 111

no huntstop

preference 0

ephone-dn 2

number 111

no huntstop

preference 1

ephone-dn 3

number 111

huntstop

preference 2

ephone 6

button 1o1,2,3

ephone 7

button 1o1,2,3

ephone 8

button 1o1,2,3

ephone 9

button 1o1,2,3

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CME Call History with overlaid phone number config

No.

4 REPLIES
Hall of Fame Super Gold

Re: CME Call History with overlaid phone number config

Why single-line ephone-dn ?

Thus is preventing you from making consulting transfer, and introduce complexity.

Use dual-line ephone-dn with huntstop channel and you should see an improvement.

Or better yet, use ephone-hunt or CME 7.x and octo-line ephone-dn.

New Member

Re: CME Call History with overlaid phone number config

thanks, short term i will switch to dual-line on the ephone-dn. This is running on a 1760V, can it support CME 7.x?

Hall of Fame Super Gold

Re: CME Call History with overlaid phone number config

No.

New Member

Re: CME Call History with overlaid phone number config

Thought so, guess we upgrade the HW. Thanks for your help

139
Views
0
Helpful
4
Replies
CreatePlease to create content