Anyone have any idea on how to control the Call Park Display message timeout? Have a requirement to have it stay on the screen until the call is either picked up or disconnected. I have checked all the timers I can come up with and no luck. I am told it is possible in CME.
Unfortunately I have read both of these docs several times in the past trying to solve this issue, but to no avail. They only appear to use the timeout command for reminders. No other feature seems to control the display.
The only solution I could come up with was to adjust the call park timers so that for example a person would get notified every 10 seconds for 6 time periods for a total of 1 minute. Otherwise there was not any method of keeping the display active.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...