04-17-2007 10:48 AM - edited 03-14-2019 09:01 PM
Hi, I've got to modify the configuration on one of my customers CME's. They would like the users in their campus to dial 0 and be passed to main reception. I've thought of doing this by creating a translation rule, translating 0 to 1200(main reception). Is there a simpler way/best practice to do this? I've had a dig about Cisco's website and cannot seem to find any examples or suggestions.
Any help would be greatly appreciated.
Thanks,
Kenny.
Solved! Go to Solution.
04-17-2007 11:36 AM
Hi,
ephone-dn XX
number 1200 secondary 0
That's it.
hope this helps, if so please rate post!
04-17-2007 11:36 AM
Hi,
ephone-dn XX
number 1200 secondary 0
That's it.
hope this helps, if so please rate post!
04-18-2007 12:03 AM
Thanks, greatly appreciated! I knew there must be a simpler way to implement it!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: