Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME - Configuring dial 0 for reception, any ideas?

Hi, I've got to modify the configuration on one of my customers CME's. They would like the users in their campus to dial 0 and be passed to main reception. I've thought of doing this by creating a translation rule, translating 0 to 1200(main reception). Is there a simpler way/best practice to do this? I've had a dig about Cisco's website and cannot seem to find any examples or suggestions.

Any help would be greatly appreciated.

Thanks,

Kenny.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CME - Configuring dial 0 for reception, any ideas?

Hi,

ephone-dn XX

number 1200 secondary 0

That's it.

hope this helps, if so please rate post!

2 REPLIES
Hall of Fame Super Gold

Re: CME - Configuring dial 0 for reception, any ideas?

Hi,

ephone-dn XX

number 1200 secondary 0

That's it.

hope this helps, if so please rate post!

New Member

Re: CME - Configuring dial 0 for reception, any ideas?

Thanks, greatly appreciated! I knew there must be a simpler way to implement it!

217
Views
0
Helpful
2
Replies