Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME/CUE across WAN link deployment

If I have CME 7.x and CUE 7.x co-located at one place (ex. Head Office).

From branch office which is across the WAN link, shall I register phones to head office CME across the wan link? Also shall I use all CUE features?

Is SCCP across WAN is fully supported on CME 7.x like CUCM server? Is there any limitation?

Pls. comment.

2 REPLIES
VIP Super Bronze

Re: CME/CUE across WAN link deployment

From branch office which is across the WAN link, shall I register phones
 to head office CME across the wan link? Also shall I use all CUE 
features? Is SCCP across WAN is fully supported on CME 7.x like CUCM server?

There is no technical limitation that makes SCCP in CME different than in UCM. The phones/CME speak the same language and as such the same requirements apply: the WAN must prioritize the voice and signaling traffic.

Is there any limitation?

CME is not intended for multi-site deployments. It has no concept of locations to solve issues such as emergency calling (e.g. 911). Some small customers use remote VPN-connected phones with CME but I would not recommend multiple offices run off a single CME install.

Please remember to rate helpful responses and identify helpful or
New Member

Re: CME/CUE across WAN link deployment

Hello Jonathan

Agree CME call routing is not as sophisticated as CUCM, but technically is it possible with one CME at HO and branch phones will register with HO CME across the WAN.?

374
Views
0
Helpful
2
Replies