Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME & dial plan

Hi;

How can i control the calls in CME

in CallManager i control the calls using partitions and CSS.

how can i do this in CME.

2 REPLIES

Re: CME & dial plan

There are a few options.

a. If all you need is to block calls globally, then you can setup after-hour patterns under telephony-service.

b.With CME 4.0 there is also a way to use a tcl script to force users to enter a FAC for LD, Intl calls etc.

c. Typically call routing is controlled just like in CM (Partitions and CSS) using COR Lists. Here is a good link

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

HTH

Sankar

PS: please remember to rate posts!

Bronze

Re: CME & dial plan

131
Views
4
Helpful
2
Replies
CreatePlease to create content