Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME - direct incoming call from PSTN

Hi Guys,

Is there any way to direct specific incoming call from PSTN to a specific dial-peer range number on CME using COR? - 3 CMEs, only 1 cme connected to PSTN.

for example, public phone number 7771234 that originate from PSTN only allow to ring dial-peer range 7771000-7771005 on CME-A then public phone number 7771235, only allow to ring dial-peer range 7771006-7771010 on CME-C.

please advice

Thanks in advance

5 REPLIES
Hall of Fame Super Gold

Re: CME - direct incoming call from PSTN

Do you need to direct on the basis of phone line, or calling number ?

New Member

Re: CME - direct incoming call from PSTN

Hi, thanks for your reply...

I need to direct on the basis of calling number

thanks,

terrence

Hall of Fame Super Gold

Re: CME - direct incoming call from PSTN

Diffrent details but same principle:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

On the DP matrching answer-address, translate called number to desired destination.

New Member

Re: CME - direct incoming call from PSTN

Hi,

Thanks for the links.

Do you have any documentation with COR?

Restrict outgoing call seems to be easier than incoming...

Thanks,

Terrence

Hall of Fame Super Gold

Re: CME - direct incoming call from PSTN

I would use number transaltion in your case actually.

356
Views
0
Helpful
5
Replies
CreatePlease to create content