Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME drops digits when dialing

I have two dial-peers configured that are similar except length of number.

dial-peer voice 5500 voip

destination pattern 55..

dial-peer voice 555 pots

destination pattern 555....

As soon as the number matches a dial peer, it ignores the remaining digits dialed. So when I dial 5551234, it sees a match to 55.. and it only dials 5551 and drops 234. What am I doing wrong? How do I get it to wait until all digits are received before choosing dial-peer?

2 REPLIES
Hall of Fame Super Silver

Re: CME drops digits when dialing

Because of the overlap your only alternative would be 555T

HTH,

Chris

Re: CME drops digits when dialing

An IOS gateway will route a call as soon as it has a match. This is different from CUCM, and as mentioned you will need to add a DTMF timeout with the T keyword.

hth

nick

152
Views
0
Helpful
2
Replies
CreatePlease to create content