01-11-2010 05:11 PM - edited 03-15-2019 09:02 PM
Greetings,
How can I get an IP Phone to dial out using a specific voice-port or voice-ports?
Thanks,
David
Solved! Go to Solution.
01-12-2010 05:14 AM
See the following link for an explanation and sample config.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
Hope this helps.
Brandon
01-12-2010 04:04 AM
Add a dedicated DN for picking the desired line, and put it on dedicated lines button.
Then, use the "trunk" command in ephone-dn, and match that number in a pots DP with the desired port..
01-12-2010 05:14 AM
See the following link for an explanation and sample config.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
Hope this helps.
Brandon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: