Recently I configured CME with two fxo ports and everything was working fine untill yesterday when no user is able to dial out!
I have posted the config, how i left it on the day of commissioning.
My second issue, not major at a moment is, I cannot access the unity epress module via http to finish up the voice mail configs. Its keeps telling me login invailed but the acl logs on permitted traffic keep counting whenever i do this. its the same config here.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...