CME hardware questions

[branfarm1]

Hi there,

I'm thinking about doing a CME install using one of the Bundled packages Cisco offers. The package I was looking at is the C2851-35UC-VSEC/K9, which is the 2851 router with CME, CUE, a PVDM2-48, and 35 user licenses. I have an existing PRI, so I would need the VWIC2-1MFT-T1/E1 card.

Can anybody help me with the licensing I would need to get up to 60 users on this system? Also, if I wanted to use an existing analog phone line to test the system before switching to the PRI, what voice interface card would I need -- FXS, FXO, or something else?

Thanks advance,

--Brandon

[paolo bevilacqua]

Analog lines to PSTN requires FXO interfaces.

Do not use that for any serious business use, too much troubles and lack of features.

[branfarm1]

Thanks for the reply. So just to verify, I could use an FXO interface hooked up to the PSTN and call into my system to test it before I actually move it over to the PRI, correct?

[sipr_ttgp]

Licensing = FL-CCME-UC-25

Reference: http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns477/ns296/data_sheet_c78_461823.html

Happy reading.

[sipr_ttgp]

http://www.cdwg.com/shop/products/default.aspx?edc=1685852&enkwrd=ALLPROD%3aFL-CCME-UC-25

ballpark $