09-23-2010 10:11 AM - edited 03-16-2019 12:58 AM
Hi,
I have CME 7.0 and 3911 sip phone. The CME's CPU is High because of the process below and CME stop working, then i have to reload do CME to it come back working again.
261 7997344 3286707 2433 59.04% 60.62% 60.68% 0 CCSIP_SPI_CONTRO
263 4128244 3351223 1231 23.53% 24.71% 24.76% 0 CCSIP_UDP_SOCKET
I've already update the IOS to least release available at Cisco web site, but the issue wasn't solved.
c2800nm-spservicesk9-mz.124-24.T4.bin
Does anyboby know something about it ?
09-27-2010 07:26 PM
Hi Evandro - Tough to say without show run or any information. Please make sure that IP CEF and IP routing is enabled in show run. Check as well for any tracebacks. During high CPU, please collect debug ccsip messages or debug ccsip all. We have to be careful when enabling the debugs so we do not cause the router to hung.
Please log the debugs in the router buffer. Disable logging monitor and logging console. Make sure that the router buffer size is set to 10000000. That should be able to tell you what kind of SIP messages migt be causing such high CPU
10-05-2010 10:25 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: