Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME - identifying DSP device

In the line "associate profile 1 register MTP0021d80c67a0" - how does one determine what that device name MTP0021d80c67a0 should be? Or can it be random?

And this configuration is required for conference calling. Is that right? Thanks.

sccp ccm group 1

associate ccm 1 priority 1

associate profile 1 register MTP0021d80c67a0

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1011075

2 REPLIES
New Member

Re: CME - identifying DSP device

The device name is arbitrary. Generally people follow the naming of MTP/CFB + MAC.

As long as the device name and type in IOS config matches what you have in CUCM, there should not be a problem.

Re: CME - identifying DSP device

In older versions (NM-HDV) you had to use the MAC address as it was defined by the system.

In newer systems with PVDM2-X (C5510), you use a different set of configurations, which allow you to apply the name. For historical reasons the MTP notation is still commonly used, but it is not necessary.

hth,

nick

146
Views
0
Helpful
2
Replies