Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME Inquiry

Hi All,

   I got a few questions below:

  1.Is it possible to deploy CCME on HQ and IP Phone at the brach connect to this CCME?

  2. I got 3 main sites and I would like to deploy 3 ccme on each site, but i don't want to use my WAN router as my ccme instead use another

  2851  and configure the ccme on that router. I want to this because I want to offload the wan router. If it's possible, the setup I want will be like this:

  CCME1 => switch1 =>WAN router1 =====>WAN router2=>switch2=>CCME2

I want to know if how will be the voip dial-peer works on this setup and how should I configure it as I see many sample that CCME is directly connected    via WAN router.

3. I want to apply a E1 pri for the PSTN connection, I want to have one number for the calls going IN and OUT to my network and also one number for the fax. How should I tell this to telco?

Appreciates to your all response! Happy New Year!!

121
Views
0
Helpful
0
Replies