Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME install in UK

We are working to install a CME system in our UK Company and they told us at first we had ISDN line and then told us we actually had a 4 line multi auxiliary analogue line. We thought that all we needed was a VIC2-4FXO card and we would be good, but have the card in and still can't dial outside. We are from our state side parent company and just trying to get this working. We need some help on figuring out if we have the correct card or what else we can check or do.

Please help if you can.

Dan

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: CME install in UK

Hi Dan

More info needed.

Your VIC is fine, assuming you have it in a supported router.

Post up show diag, show run for a start...

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
3 REPLIES
Super Bronze

Re: CME install in UK

Hi Dan

More info needed.

Your VIC is fine, assuming you have it in a supported router.

Post up show diag, show run for a start...

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: CME install in UK

Arron can I possibly give you a call. We are having trouble with this install and finding peo

ple to help us.

Cisco Employee

Re: CME install in UK

Can you attach the following command output to the thread.

show version

show run

show diag

show voice call summary

show voice port summary

show call history voice brief

-Felipe

149
Views
0
Helpful
3
Replies