we wanted to add a CME in our CU Operations Manager. We added it with its management IP, but because this IP is different than the IP for managing the Call Manager, it appears as unreachable in the CUOM.
Of course, there is a firewall between the CME and the CUOM.
What do we have to do in order to get the device in green?
Before installing Operations Manager, make sure that the ports that Operations Manager uses are not already being used by your existing applications. Ensure that the firewalls between the Operations Manager server and the managed devices are configured to allow management traffic through.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...