CME- Is there a way to perform all-phones page/intercom

[mm7482]

I know the current restriction is 10 phones in 4.0.0; but is there a way to build multiple groups of 10 phones or is there talk of future CME versions supporting the ability to output on all phone speakers (intercom/page) at once?

Thanks,

Mike.

[Brandon Buffin]

Mike,

The limit of 10 phones is only for unicast paging. Any number of phones can be paged using multicast. Take a look at the following link.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_administration_guide_chapter09186a00801f12ea.html#wp2175048

Hope this helps. If so, please rate the post.

Brandon

[mm7482]

Right on! Thanks for the help!

Mike.