I've a CME installed and working properly except for one thing. I've a hunt group configured with three members: two IP phones and and analog phone connected to an ATA186. The hunt group is configured as sequential and the last member is the analog phone. The incoming call enters the system and the first IP phone rings, after the timeout the second IP phone rings, and after the timeout the analog phone starts ringing. The problem is that the calling user starts hearing a fax tone instead of a ring when the analog phone starts ringing.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4