yes I did a bit more reading and as you indicated I just needed to accept the license prompt.
Previously I set up my CME configuration via Cisco Configuration Professional and it set things up as "mode cme".
But as I have had problems with this configuration and the SIP REGISTER, I wiped the configuration and started again via ios command line.
With the command line configuration I did not do a "mode cme" and so the configuration seems to have defaulted to "mode cme-srst" which has resulted in reason for prompt.
My reading indicates that as long as I am within limit of "max-pool 25" then I should be ok license wise, however I have since set "mode cme" as I believe this reflects what I am trying to do, which is to create a SMB SIP hub which handles REGISTER and local SIP network as well as allowing me to create SIP trunks out to SIP Service Providers and my own Cisco SPA for PSTN integration.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4