Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME multiple SIP providers

Hi at all,

I would like to configure multiple sip trunk on cme 4. There is any way to this?

Thanks, Bye!

2 REPLIES
Hall of Fame Super Gold

Re: CME multiple SIP providers

Yes, but there are issues for authentication.

The ideal would be to be assigned the same username and password for both, I realize this may be impossible.

New Member

Re: CME multiple SIP providers

Thanks for your response,

look my config below:

!

dial-peer voice 1 voip

preference 1

destination-pattern .T

voice-class codec 1

session protocol sipv2

session target dns:voip.eutelia.it:5060

dtmf-relay rtp-nte

!

dial-peer voice 2 voip

preference 2

destination-pattern 5T

voice-class codec 1

session protocol sipv2

session target dns:sip.messagenet.it:5061

incoming called-number 5311402

!

sip-ua

authentication username 053* password *

no remote-party-id

registrar dns:voip.eutelia.it:5060 expir 3600

sip-server dns:voip.eutelia.it:5060

!

I have noticed that I can configure only 1 registrar and only 1 sip-server on sip-ua config.

Let me know if there is another method to do this, I would like to use 2 or 3 registrar an sip-server...

Thanks, Bye!!!

285
Views
0
Helpful
2
Replies