I have 2821 CME witn NM-CUE runing on 3.2.1 having MWI issues on internal calls only. When I call internally to another phone in the office and leave a voice mail – their light indicator is not going on.
Thank you for the reply, by update you mean to upgrade codes on CME & CUE, to configure unsolicted notify you need to add SIP configuration, I am not doing SIP in my router, does it matter ? will mwi-server ipv4 address be cue or cme ?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...