Not sure what you mean by "ZIP type" CME. CME is part of IOS. It doesn't need to be installed separately. Only the support files (phone firmware, GUI files, etc) need to be downloaded manually to the router flash. Can you clarify?
Thank you for your reply, ok, Let us say , I want to install cme 4.2 full in my 3745. It doesn't work but I can download " cme-124-11xw2.zip" with a IOS of example c 3745-ipvoice-mz.124-11.XW7.bin.
After dowloading the ios , I have to unzip the cme and archive tar file and copy the other files in the flash. Ok. With this method, all the cme's fit the 3745, ( except the cme 22.214.171.124), but directories seems not to be there. When I issue command " dir flash:/phone. There is nothing no directories. So I can't go any forward.
I can install the CME gui 126.96.36.199 no problem, and it takes it nicely but command "mkdir phone" doesn't work so how can I do it manually.
Am I on the right track or missing something reaaly big. Because there is nothing on the cisco's official book about this. It just uses a cisco 2801 machine with CME full 4.3
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...