11-18-2013 11:41 PM - edited 03-16-2019 08:28 PM
Hi everybody,
By using CME, there are 2 groups of phones
Group A - 1001 ~ 1010
Group B - 2001 ~ 2010
If Group A phone calls to PSTN via Port 0/0/0
and Group B phone calls to PSTN via Port 0/0/1
Is it possible to do it via dial-peer ?
Or I have to apply Corlist command to do that?
Thanks in advance
Sam
Solved! Go to Solution.
11-19-2013 12:19 AM
Hi,
you can do corlists or you can set up an incoming translation profile on the ephone-dn level, adding a special prefix to the called number and then match that special prefix on the outbound dial-peer level.
G.
11-19-2013 12:19 AM
Hi,
you can do corlists or you can set up an incoming translation profile on the ephone-dn level, adding a special prefix to the called number and then match that special prefix on the outbound dial-peer level.
G.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: