Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CME Outbound Caller ID

Hello All,

I know we can do this in CM but checking for CME. on a PRI we want to show outbound caller ID as 1 of 3 or 4 masking numbers for some phones and no number show at all for other phones.

Possible in CME?

Thanks in advance! All replies rated.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: CME Outbound Caller ID

You can use the following command to block caller ID:

ephone-dn 1

block caller-id

You can use translation rules to send out varying caller ID, such as:

voice translation-rule 1

rule 1 /1000/ /1234567890/

rule 2 /2000/ /1235551212/

voice translation-profile 1

translate calling 1

voice-port 0/1/0:23

translation-profile outgoing 1

Hope this helps.

Brandon

1 REPLY
VIP Purple

Re: CME Outbound Caller ID

You can use the following command to block caller ID:

ephone-dn 1

block caller-id

You can use translation rules to send out varying caller ID, such as:

voice translation-rule 1

rule 1 /1000/ /1234567890/

rule 2 /2000/ /1235551212/

voice translation-profile 1

translate calling 1

voice-port 0/1/0:23

translation-profile outgoing 1

Hope this helps.

Brandon

763
Views
5
Helpful
1
Replies
CreatePlease to create content