Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME outgoing display-ie

Have CME router connected to call manager via qsig trunk. Outbound calls from CME are not displaying caller ID name to call manager. What am I missing?

interface Serial0/2/0:23

no ip address

encapsulation hdlc

isdn switch-type primary-qsig

isdn incoming-voice voice

isdn supp-service name calling profile Network-Extensions operation-value-tag local

isdn outgoing display-ie

no cdp enable

ephone-dn 17 octo-line

number 3001

label 3001 SCCP CUCME

description 3214-3001

ephone 7

device-security-mode none

description 3001 SCCP CUCME

mac-address 0015.2BC7.E368

ephone-template 1

max-calls-per-button 5

busy-trigger-per-button 3

type 7940

button 1:17 2:11

  • IP Telephony
3 REPLIES
Hall of Fame Super Gold

Re: CME outgoing display-ie

Check "debug isdn q931" but logic says the calling name is there, in two formats possibly.

BTW why don't you just use H.323 to trunk to CUCM ?

New Member

Re: CME outgoing display-ie

studying for IE lab

Channel ID i = 0xA98385

Exclusive, Channel 5

Progress Ind i = 0x8183 - Origination address is non-ISDN

Calling Party Number i = 0x0080, '3001'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '3335002'

Plan:Unknown, Type:Unknown

Hall of Fame Super Gold

Re: CME outgoing display-ie

Name not being sent, try

voice service voip

qsig decode

539
Views
0
Helpful
3
Replies
This widget could not be displayed.