Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME over SIP

Hello,

I need to know what is the version of CME who support the SIP protocol.

Thank you in advance

1 REPLY
Hall of Fame Super Red

Re: CME over SIP

Hi Jose,

CME support for SIP was first introduced in CME 3.4 and has evolved through CME 4.1 Have a look at the following;

CME 3.4

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a008055677f.html

Cisco Unified SIP IP Phone 7905G and Cisco Unified SIP IP Phone 7912 for Cisco CallManager Express 3.4

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme34/cme34rc1.htm

Cisco Unified SIP IP Phone 7960G and Cisco Unified SIP IP Phone 7940G for Cisco CallManager Express 3.4

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme34/cme34rc2.htm

CME 4.1

SIP Features for Cisco Unified CME 4.1,

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme41/cme410ft.htm

How to Configure SIP Features for Cisco Unified CME 4.1

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme41/cme410ft.htm#wp1049437

Hope this helps!

Rob

147
Views
0
Helpful
1
Replies