Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME Presence with Extension Mobility

Hello,

I have a CME 8.6 running on a 2811 ISR.

It is currently configured with Extension Mobility. Phones are all 7960.

I want to implement presence and have followed the admin guide to do so, but I've come across a problem

blf-speed-dial command.

When trying to do this under ephone<tag> it says

"Please configure under logout profile for em enabled phone"

How does this work when it's configured for the logout profile and not the user profile?

I did try and configure it under there and it does not do anything.

btw I only have 1 logout profile for the entire system.

Regards

Felix

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Blue

CME Presence with Extension Mobility

Hi

The BLF is to be configured in Logout profile only. See below link and see section "Configuring a Logout Profile for an IP Phone"

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html

Command is

speed-dial speed-tag number [label label] [blf]

Regards

Ronak patel

Please rate helpful posts by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
3 REPLIES
Blue

CME Presence with Extension Mobility

Hi

The BLF is to be configured in Logout profile only. See below link and see section "Configuring a Logout Profile for an IP Phone"

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html

Command is

speed-dial speed-tag number [label label] [blf]

Regards

Ronak patel

Please rate helpful posts by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

Re: CME Presence with Extension Mobility

Hi Ron,

So in CME the phone appearance is a combination of

1) the voice user-profile

AND

2) logout profile

Which means I should have a unique logout profile for each user who is on EM and wants BLF?

Regards

Felix

New Member

Re: CME Presence with Extension Mobility

Just to add that this is now working.

When you configure the BLF under the logout profile it "adds" it in the voice user-profile.

you can see the change when doing a show run, that the blf speed dial commands now appear under the user-profile.

Thanks

Felix

766
Views
0
Helpful
3
Replies
CreatePlease login to create content