10-11-2013 05:54 AM - edited 03-16-2019 07:51 PM
Hi
Customer has a CME AND ONE ATA
We want one third party analoque device that it will be connected to the ATA and will have the fuctionality to transfer calls
Do you know any device ?
Solved! Go to Solution.
10-11-2013 07:23 AM
Hi Chrysostomos,
When they are on a call they should be able to
use "Flash" to start a call transfer. Can you give that
a try
Cheers!
Rob
"Why do the best things always disappear "
- The Band
10-11-2013 05:01 PM
Chrysostomos
The recall/flash button is the "R" button int right centre according to the manual
Regards,
Alex.
Please rate useful posts.
10-11-2013 06:06 AM
Any analog phone can transfer calls using hookflash or the dedicated button. What is the problem or need that is being faced here ?
10-11-2013 06:21 AM
Hi Paolo
The specific model that the customer has is Panasonic KX-TG1612EH and they dont see anywhere any button for transfer
If you have any other device better that this with transfer button pls advice
10-11-2013 07:23 AM
Hi Chrysostomos,
When they are on a call they should be able to
use "Flash" to start a call transfer. Can you give that
a try
Cheers!
Rob
"Why do the best things always disappear "
- The Band
10-11-2013 05:01 PM
Chrysostomos
The recall/flash button is the "R" button int right centre according to the manual
Regards,
Alex.
Please rate useful posts.
10-16-2013 05:23 AM
Thank you very very much
Please rate all useful posts
Regards
Chrysostomos
""The Most Successful People Are Those Who Are Good At Plan B""
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: