I have finished upgrading a 2801 and an ASA. The router has IOS 15.1.4(M) with CME 8.6(with SRST). The AIM-CUE Module is updated to 7.3 and the ASA is at 9.1 The Anyconnect is also updated to the latest for the remote phone. Everything is working slendidly. I have 3 people with pcs at the office that would like the soft phone installed so they can use the laptop/desktop as well as the phone. Same extention. I also have a remote user out west that will need for his 7960 to be able to be on the network, as well as a soft phone for him (same extension).
Can y'all share your experience and point me to some configuration help? Especially the connection of the remote/vpn phone.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...