Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.



We have an old router that now is in a production environment :

The cme is a 2611XM router with ios c2600-ipvoice-mz.123-11.YZ2.bin

We have some issues with these versions (3,2 AND 3,3) and we need to move to the latest available version for this model and for these specs 126/32 flash

can you provide one ios for this router ?

HEADOFFICE#show  version

Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(11)YZ2, RELEASE SOFTWARE (fc2)

Technical Support:

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 08-Aug-07 20:39 by dchih

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

PJC_HEADOFFICE uptime is 1 hour, 9 minutes

System returned to ROM by reload at 11:55:00 CY Wed Mar 28 2012

System restarted at 12:03:14 CY Wed Mar 28 2012

System image file is "flash:c2600-ipvoice-mz.123-11.YZ2.bin"

Cisco 2611XM (MPC860P) processor (revision 0x300) with 125990K/5082K bytes of memory.

Processor board ID JAE0821HUXG (1409391963)

M860 processor: part number 5, mask 2

2 FastEthernet interfaces

1 Serial interface

2 ISDN Basic Rate interfaces

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

HEADOFFICE#show  telephony-service

CONFIG (Version=3.2)


Version 3.2

Cisco CallManager Express

For on-line documentation please see:

ip source-address port 2000

load 7910 P00403020214

load 7960-7940 P0030702T023

max-ephones 24

max-dn 48

max-conferences 4

dspfarm units 0

dspfarm transcode sessions 0

hunt-group report delay 1 hours

max-redirect 5

moh moh-greek.wav

time-format 12

date-format dd-mm-yy

timezone 0 Greenwich Standard Time

transfer-pattern 9T

keepalive 30

timeout interdigit 3

timeout busy 10

timeout ringing 180

caller-id name-only: enable

system message P.C. Splash

web admin system name admin  password admin1

web admin customer name Customer

edit DN through Web:  enabled.

edit TIME through web:  enabled.

Log (table parameters):

     max-size: 150

     retain-timer: 15

create cnf-files version-stamp 7960 Mar 08 2012 10:43:41

transfer-system full-consult

local directory service: enabled.

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
Hall of Fame Super Gold


The 2611 is totally obsolete and you will not have good results using it.

Anyway, you can ask your reputable consultant or UC certified cisco partner for help.