Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME Russia

I have to configure a ccme with the following cards:

VIC2-2BRI-NT/TE=

VIC-4FXS/DID=

How do i configure the settings for russia? I haven't found any info for configuring this interfaces according to the standards of Russia.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CME Russia

Configure the BRI interface for switchtype basic-net3. Configure "cptone RU" under the FXS voice-port. That's all.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: CME Russia

Configure the BRI interface for switchtype basic-net3. Configure "cptone RU" under the FXS voice-port. That's all.

Hope this helps, please rate post if it does!

96
Views
0
Helpful
1
Replies