Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME Silent Rings Immediately followed by Audible Rings

Hi,

For the above code, I get 6 silent rings on my 2nd line. I want only the 1st 3 rings to be silent rings and the last 3 rings to be normal audible rings. I'll appreciate a solution. Thanks all.

ephone 1

mac-address aaaa.bbbb.cccc

type 7960

button 1:12 2s15

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CME Silent Rings Immediately followed by Audible Rings

Hi, CCME doesn't support increasing volume rings, the only thing you can do is configure CFNA from a silent ring button to another that has audible ring:

ephone-dn 15 dual-line

call-forward noan 416 timeout 15

ephone-dn 16 dual-line

number 416

ephone 1

button 2s15 3:16

Hope this helps, please rate post if it does!

4 REPLIES
Hall of Fame Super Gold

Re: CME Silent Rings Immediately followed by Audible Rings

Hi, CCME doesn't support increasing volume rings, the only thing you can do is configure CFNA from a silent ring button to another that has audible ring:

ephone-dn 15 dual-line

call-forward noan 416 timeout 15

ephone-dn 16 dual-line

number 416

ephone 1

button 2s15 3:16

Hope this helps, please rate post if it does!

New Member

Re: CME Silent Rings Immediately followed by Audible Rings

Hi,

I only have 7941 phones and so there is no 3rd button. So I'll appreciate a solution for two button phones.

Thanks in advance.....

Hall of Fame Super Gold

Re: CME Silent Rings Immediately followed by Audible Rings

Use first button on overlay as necessary with call waiting and 2nd button for silent ting, or viceversa.

New Member

Re: CME Silent Rings Immediately followed by Audible Rings

Thanks. It worked

147
Views
0
Helpful
4
Replies
CreatePlease to create content