Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CME SIP Phone to SCCP phone call transfer issue

Hi All

The incoming call transfer  I cannot possible to Sip to Sccp phone sccp to sccp is transfer is working .

Sip phone 8961

sccp phone 7945,6921

please check configuration

voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 no supplementary-service h450.2
 no supplementary-service h450.3
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
 h323
 sip
  registrar server expires max 300 min 60

 

 

oice register dn  1
 number 0
 call-forward b2bua noan 999 timeout 20
 allow watch
 name Operator
 label Operator

voice register pool  1
 id mac 1CAA.0710.0AC1
 type 8961 addon 1 CKEM
 number 1 dn 1
 template 1
 dtmf-relay rtp-nte sip-kpml sip-notify
 username cisco password cisco
 codec g711ulaw
 no vad
 camera
 video

 

telephony-service
 sdspfarm units 3
 sdspfarm tag 1 conference
 conference hardware
 conference transfer-pattern
 video
 no auto-reg-ephone
 max-ephones 100
 max-dn 250
 ip source-address 192.1.1.111 port 2000
 system message LCC_SIPOREX
 time-zone 31
 date-format dd-mm-yy
 voicemail 999
 mwi reg-e164
 max-conferences 8 gain -6
 web admin system name admin secret 5 $1$qHe3$xblvRD1ouV4jr8RcGUiMM.
 dn-webedit
 time-webedit
 transfer-system full-consult
 create cnf-files version-stamp Jan 01 2002 00:00:00

 

Thank you

 

1 ACCEPTED SOLUTION

Accepted Solutions

Genius post, Martin!

Genius post, Martin!

8 REPLIES

Hi @,Try this config under

Hi @,

Try this config under the telephony-service globa configuration:

telephony-service

 call-park system application

After this, re-create both configuration files (in voice register global and telephony-service):

voice register global

 no create profile

 create profile

telephony-service

 no create cnf-files

 create cnf-files

And restart the phones.

HTH.

Rgrds,

Martin, IT Specialist

Hi MartinThanks your replay i

Hi Martin

Thanks your replay i will check and update u .

HiIts problem solved thanks

Hi

Its problem solved thanks all

Good to hear that!Did you use

Good to hear that!

Did you use the commands that I provided you or did you fix it in other way? If so, please share it.

Don't forget to rate.

Rgrds,

Martin, IT Specialist.

Hi alli used this command its

Hi all

i used this command its working well

telephony-service

 call-park system application

voice register global

 no create profile

 create profile

telephony-service

 no create cnf-files

 create cnf-files

 

Thank you 

If the option that I gave you

.

Genius post, Martin!

Genius post, Martin!

New Member

What do you get when you

What do you get when you press transfer? Fast busy tone? Can you configure the DN assigned to SIP as dual-line.

Rgds,

Wilmer

717
Views
15
Helpful
8
Replies
CreatePlease login to create content