Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME SIP trunk error

I'm testing out a SIP trunk and outbound calling is working great.  The problem I'm having is with inbound calling.  Whenever I call in, I get a regular busy signal.  I've verified that it hit's my inbound voip dial peer.  I have a translation profile on the dial-peer that chops it down to 4 digits and I've done a debug to verify it as well.  I'm new to SIP trunking so forgive me if I'm missing something obvious.  When I do a debug ccsip messages I get this:

SIP/2.0 403 Forbidden

Via: SIP/2.0/UDP x.x.x.x:5060;rport;branch=z9hG4bK-fc2286932f7857a184f62bb901a70714-x.x.x.x-1

From: PILEUM CORP    <sip:6012781848@x.x.x.x:5060;transport=udp>;tag=x.x.x.x+1+b448b+ddce8a8f;isup-oli=61

To: <sip:XXXXXXXXXX@>;tag=49A93D4-1DE3

Date: Fri, 25 May 2012 18:28:24 GMT

Call-ID: 6A2D33E8@x.x.x.x

CSeq: 975324194 INVITE

Allow-Events: telephone-event

Server: Cisco-SIPGateway/IOS-12.x

Reason: Q.850;cause=21

Content-Length: 0

Everyone's tags (5)
New Member

CME SIP trunk error

I found it.  It was the ipv4 trust list.

VIP Super Bronze

CME SIP trunk error

Yes when you see cause code of 21..its IP trust list issue

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"