I have several 9951's that I've added to CME 9.0. Users of SCCP phones are used to use the Speed Dial softkey. I need this same functionality for these SIP phones.
I've read the Feature Policy Soft Key Control section in the Administation Guide and haven't been able to figure out how to enable the Speed Dial softkey. I was able to manually modify the featurePolicy1.xml file which enable the Speed Dial button. Unfortunatly once I entered the command Create Profile the file was overwritten an dresorted back to the default which removed the Speed Dial button.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...